High Efficiency DSJ Series Drying Hammer Mills from China Suppliers and Factory - Low Energy Consumption and Superior Performance
Product Display
Product Data
| Model | Max Feed Size(mm) | Capacity(t/h) | Water content of feed material | Motor Power(kw) |
|---|---|---|---|---|
| DSJ1515 | ≤100 | 20-25 | ≤15% | 75 |
| DSJ2015 | ≤100 | 30-35 | ≤15% | 132 |
| DSJ2020 | ≤100 | 35-40 | ≤15% | 132 |
| DSJ2515 | ≤100 | 40-50 | ≤15% | 160 |
| DSJ2817 | ≤100 | 65-80 | ≤15% | 315 |
| DSJ3026 | ≤100 | 110 | ≤15% | 600 |
| DSJ4325 | ≤100 | 150-160 | ≤15% | 800 |
DSJ Series Drying Hammer Mill Brief Introduction
In gypsum board industry, the rotor on DSJ Series Drying Hammer crusher can break up and throw the desulfurized gypsum slag, whose water content is no more than 28%. During this process, the gypsum slag exchanges the heat with the intake hot air of 550°C, and then the max water content of the material is 1%, which goes into riser from outlet duct and then hot air takes the material into the next process. This machine can also be used to dry and crush filtered cake in cement industry and calcium carbide slag in environmental protection.
Desulfurized gypsum slag used to be processed through the landfill, which seriously pollutes the environment and uses the farmland. Nowadays, the desulfurized gypsum slag can be used as construction gypsum powder after being processed by this machine. What's more, its performance is better than that of natural gypsum. It is high-quality raw material to produce gypsum board.
