China JC Series Jaw Crusher: High-Strength, Reliable, and Productive from Trusted Suppliers and Factory
Product Display
PRODUCT DATA
Technical Data of JC Series Jaw Crusher:
| Model | Width Of Feeding Opening(mm) | Depth Of Feeding Opening(mm) | Max Feeding Size(mm) | Min Discharge Size(mm) | Max Discharge Size (mm) | Power (kw) | RPM（rmp） | Capacity（t/h，with pre-Screening) | Capacity（t/h，without pre-screening) |
| JC40 | 400 | 250 | 200 | 20 | 80 | 18.5 | 300 | 3-25 | 4-28 |
| JC60 | 630 | 440 | 350 | 40 | 100 | 45 | 300 | 40-135 | 45-205 |
| JC75 | 750 | 500 | 400 | 40 | 100 | 55 | 300 | 50-165 | 55-255 |
| JC231 | 800 | 510 | 410 | 40 | 175 | 55-75 | 310 | 55-335 | 60-515 |
| JC337 | 930 | 580 | 465 | 60 | 175 | 90 | 310 | 105-390 | 120-590 |
| JC340 | 1060 | 600 | 480 | 60 | 175 | 75-90 | 280 | 140-480 | 165-675 |
| JC442 | 1060 | 700 | 560 | 70 | 200 | 90-110 | 280 | 150-500 | 175-760 |
| JC110 | 1100 | 850 | 680 | 70 | 200 | 132 | 230 | 160-530 | 190-790 |
| JC120 | 1200 | 870 | 695 | 70 | 200 | 160 | 230 | 175-610 | 205-945 |
| JC125 | 1250 | 950 | 760 | 100 | 250 | 160 | 220 | 255-800 | 310-1205 |
| JC649 | 1250 | 1100 | 880 | 125 | 250 | 200-250 | 220 | 325-835 | 410-1230 |
| JC150 | 1400 | 1200 | 960 | 125 | 250 | 200 | 220 | 340-880 | 420-1320 |
| JC659 | 1500 | 1200 | 960 | 150 | 300 | 200-250 | 220 | 415-1085 | 565-1605 |
| JC160 | 1600 | 1200 | 960 | 150 | 300 | 250 | 220 | 430-1145 | 600-1910 |
| JC663 | 1600 | 1200 | 960 | 150 | 300 | 280-315 | 220 | 495-1315 | 660-2100 |
| JC671 | 1800 | 1200 | 960 | 150 | 300 | 355 | 200 | 555-1495 | 700-2275 |
| JC759 | 1500 | 1300 | 1040 | 150 | 300 | 200 | 200 | 420-1100 | 575-1645 |
| JC771 | 1800 | 1500 | 1200 | 175 | 350 | 400 | 200 | 580-1710 | 795-2925 |
| JC783 | 2100 | 1500 | 1200 | 175 | 350 | 450 | 200 | 725-1965 | 1000-3250 |
| Model | JC40 | JC60 | JC75 | JC231 | JC337(JC96) | JC340 | JC442(JC106) | JC110 | JC120 | JC125 | JC649 | JC150 | JC659 | JC160 | JC663 | JC671 | JC759 | JC771 | JC783 |
| Crusher throughput capacity, scalped feed material | |||||||||||||||||||
| Discharging Size (mm) | Capacity (t/h) | ||||||||||||||||||
| 20 | 3-5 | ||||||||||||||||||
| 30 | 4-7 | ||||||||||||||||||
| 40 | 6-10 | 40-50 | 50-65 | 55-75 | |||||||||||||||
| 50 | 9-14 | 45-65 | 55-80 | 65-95 | |||||||||||||||
| 60 | 12-18 | 50-75 | 65-95 | 80-110 | 105-135 | 140-175 | |||||||||||||
| 70 | 16-21 | 65-85 | 80-105 | 95-135 | 125-155 | 155-205 | 150-185 | 160-200 | 175-240 | ||||||||||
| 80 | 20-25 | 75-95 | 95-120 | 110-150 | 140-180 | 180-225 | 165-215 | 175-235 | 195-270 | ||||||||||
| 90 | 90-110 | 105-135 | 120-175 | 160-200 | 195-255 | 190-235 | 205-260 | 210-305 | |||||||||||
| 100 | 100-135 | 120-165 | 140-190 | 175-225 | 245-310 | 205-265 | 215-295 | 235-325 | 255-350 | ||||||||||
| 125 | 175-245 | 220-280 | 295-370 | 255-325 | 265-355 | 285-395 | 310-420 | 325-445 | 340-470 | ||||||||||
| 150 | 210-290 | 265-335 | 345-435 | 305-385 | 315-415 | 340-475 | 360-500 | 375-525 | 400-555 | 415-575 | 430-610 | 495-690 | 555-865 | 420-585 | 580-800 | ||||
| 175 | 245-335 | 310-390 | 385-480 | 355-450 | 365-480 | 385-540 | 410-570 | 425-600 | 460-635 | 470-655 | 495-695 | 570-795 | 645-975 | 475-675 | 630-890 | 690-970 | |||
| 200 | 395-500 | 405-530 | 435-610 | 460-640 | 495-685 | 520-720 | 540-745 | 560-790 | 645-895 | 725-1065 | 550-765 | 710-1000 | 775-1090 | ||||||
| 225 | 510-720 | 535-750 | 580-800 | 600-830 | 625-880 | 720-1005 | 775-1180 | 610-850 | 785-1105 | 855-1210 | |||||||||
| 250 | 560-800 | 595-835 | 640-880 | 670-920 | 685-965 | 785-1135 | 845-1310 | 675-940 | 865-1215 | 950-1330 | |||||||||
| 275 | 720-1005 | 745-1055 | 855-1250 | 950-1405 | 730-1025 | 940-1320 | 1030-1445 | ||||||||||||
| 300 | 785-1085 | 815-1145 | 935-1315 | 1050-1495 | 800-1100 | 1015-1435 | 1110-1565 | ||||||||||||
| 325 | 1095-1565 | 1195-1710 | |||||||||||||||||
| 350 | 1175-1710 | 1280-1870 | |||||||||||||||||
| Model | JC40 | JC60 | JC75 | JC231 | JC337(JC96) | JC340 | JC442(JC106) | JC110 | JC120 | JC125 | JC649 | JC150 | JC659 | JC160 | JC663 | JC671 | JC759 | JC771 | JC783 |
| Crusher throughput capacity, Non-scalped feed material | |||||||||||||||||||
| Discharging Size (mm) | Capacity (t/h) | ||||||||||||||||||
| 20 | 4-6 | ||||||||||||||||||
| 30 | 5-8 | ||||||||||||||||||
| 40 | 7-12 | 45-60 | 55-80 | 60-85 | |||||||||||||||
| 50 | 10-16 | 50-75 | 60-90 | 65-95 | |||||||||||||||
| 60 | 13-20 | 60-90 | 80-105 | 90-125 | 120-155 | 165-200 | |||||||||||||
| 70 | 19-23 | 80-110 | 100-135 | 110-155 | 140-180 | 175-220 | 175-215 | 190-250 | 205-275 | ||||||||||
| 80 | 21-28 | 105-140 | 115-155 | 135-180 | 155-210 | 200-255 | 190-240 | 210-275 | 235-320 | ||||||||||
| 90 | 115-165 | 140-190 | 155-210 | 180-245 | 225-295 | 215-275 | 235-305 | 270-365 | |||||||||||
| 100 | 155-205 | 160-225 | 180-240 | 210-285 | 245-335 | 240-315 | 255-355 | 300-410 | 310-420 | ||||||||||
| 125 | 240-325 | 280-380 | 305-435 | 305-415 | 330-460 | 390-530 | 400-540 | 410-555 | 420-570 | ||||||||||
| 150 | 310-415 | 355-485 | 400-540 | 385-525 | 425-575 | 485-655 | 495-670 | 505-690 | 520-705 | 565-715 | 600-810 | 660-890 | 700-950 | 575-735 | 795-1090 | ||||
| 175 | 380-515 | 440-590 | 495-675 | 470-640 | 520-705 | 580-800 | 595-810 | 610-820 | 625-850 | 680-825 | 720-975 | 790-1070 | 845-1145 | 695-840 | 915-1240 | 1000-1360 | |||
| 200 | 560-760 | 615-790 | 680-945 | 695-955 | 715-970 | 740-1000 | 790-1015 | 850-1150 | 935-1265 | 1015-1375 | 820-1035 | 1080-1465 | 1175-1600 | ||||||
| 225 | 805-1070 | 830-1090 | 855-1155 | 905-1175 | 980-1330 | 1080-1465 | 1175-1565 | 935-1195 | 1255-1700 | 1370-1855 | |||||||||
| 250 | 910-1205 | 930-1230 | 975-1320 | 1030-1320 | 1120-1515 | 1230-1665 | 1325-1795 | 1050-1350 | 1435-1900 | 1570-2075 | |||||||||
| 275 | 1150-1475 | 1265-1710 | 1390-1880 | 1490-2035 | 1175-1495 | 1625-2200 | 1775-2405 | ||||||||||||
| 300 | 1305-1605 | 1410-1910 | 1550-2100 | 1665-2275 | 1345-1645 | 1820-2460 | 1990-2685 | ||||||||||||
| 325 | 2005-2715 | 2190-2970 | |||||||||||||||||
| 350 | 2195-2925 | 2395-3250 | |||||||||||||||||
The crusher capacities listed are based on instantaneous sampling of medium hardness rocks. The above data is for reference only, please contact our engineers for equipment selection for specific projects. The crusher output shown in the above figures is based on crushing medium fragile rocks with an average specific gravity of 2.7t/m³, when the feed materials enter the crushing chamber smoothly without bridging and blocking. The small value is taken when the feed materials are not smaller than the discharge port. The large value is taken when the fine materials are included in the feed materials. The output may vary with the feeding method and material nature such as grain size composition, water and mud content, bulk density and friability.
FEATURES AND TECHNOLOGY ADVANTAGES OF JC SERIES JAW CRUSHER
Robust structure
There are two types of machine frame: welded model and assembled model. The former is for small and middle size, and the latter is for big size.
The welded type adopts large arc fillet and low stress welding method, greatly reduces the concentration stress which ensures rack equal strength in all directions, high impact resistance, even force, low failure rate.
Assembled uses advanced modularization and non-welded frame structure design of high fatigue strength and high reliability. Meanwhile machine assembly design makes transportation, and installation more convenient, especially suitable for installation in narrow and small places like undermine and high altitude mining.
The welded type adopts large arc fillet and low stress welding method, greatly reduces the concentration stress which ensures rack equal strength in all directions, high impact resistance, even force, low failure rate.
Assembled uses advanced modularization and non-welded frame structure design of high fatigue strength and high reliability. Meanwhile machine assembly design makes transportation, and installation more convenient, especially suitable for installation in narrow and small places like undermine and high altitude mining.
Optimized cavity structure
Symmetrical V formed design, toggle of large obliquity, long stroke, reasonable rotor speed, allow larger materiel block in feeding, higher productivity, homogeneous output granule, less attrition for jaw plate.
The whole set of heavy movable jaw plate is durable
The whole set of heavy movable jaw plate integrates forged heavy eccentric shaft, high quality bearing of heavy loading, the design of movable jaw plate optimized by finite element analysis. These features assure the stroke resistance and stability. Labyrinth seal and centralized lubricating system prevent the greese of bearing not to be contaminated, and assure the easy lubrication which results in longer function and more stability.
Protective planch of movable jaw plate
Heavy protective planch installed above the movable jaw plate protects internal bearing from damage caused by material falling down in feeding moment.
One piece cast of bearing seat
One piece cast of bearing seat assures good match with frame, and avoids unnecessary radio direction pression for bearing in fastening process which occurs usually to composed bearing seat. Therefore, bearing can function more stably.
Fast and easy adjustment of output granularity
JC jaw crusher adopt mechanic or hydraulic device to adjust discharge opening. Compared with shim, adjustment by double block is simpler, saver, faster, and reduces downtime.
Installation integrating motor & crusher
Integrative installation of motor chassis and crusher frame not only saves installation space of jaw crusher but also reduces the length of Vee belt. Thanks to synchronous movement of crusher frame, motor chassis and motor. Adjustable motor chassis can realize the adjustment of Vee-belt's tensile force to make the Vee-belt more durable.
Shock absorber installation
The crusher is fixed by the device of special rubber shock absorber, which absorbs effectively the its vibration at the peak point and meanwhile, allows crusher to displace in vertical and horizontal direction. In this way, the shock to foundation would be reduced.
WORKING PRINCIPLE OF JC SERIES JAW CRUSHER
The motor drives belt and pulley. The movable jaw swings up and down before and after through the eccentric shaft. When the movable pushes the movable jaw plate to the fixed jaw plate, the material is crushed or split into pieces. When the movable jaw and movable jaw plate springs back in the effect of eccentric shaft, the material previously have been crushed discharges from the discharge opening of the lower part. With the motor continuously rotating, the movable jaw breaks and discharges material periodically to achieve mass production.
Frequently Asked Questions (FAQ)
What are the frame options available for the JC Series Jaw Crusher?
The JC Series Jaw Crusher features two types of machine frames: a welded model designed for small and middle-sized equipment, and an assembled modular, non-welded model designed for larger sizes to facilitate easier transportation and installation in narrow or high-altitude spaces.
How is the discharge granularity adjusted in the JC Series?
Unlike traditional shim systems, the JC jaw crusher utilizes a mechanical or hydraulic double-block adjustment device. This method makes output size adjustment simpler, safer, faster, and significantly reduces operational downtime.
What is the advantage of the integrated motor and crusher installation?
By integrating the motor chassis and crusher frame, the installation saves valuable space and reduces the required length of the Vee-belt. The synchronous movement also allows for easy adjustment of the Vee-belt's tension, extending its overall lifespan.
How does the shock absorber installation protect the foundation?
The crusher is mounted using a specialized rubber shock absorber system. This configuration absorbs peak vibrations dynamically and permits controlled vertical and horizontal displacement, which minimizes the impact force transmitted to the foundation.
What factors influence the rated capacity of these jaw crushers?
The output capacity depends on the feeding method, material properties (such as grain size composition, moisture/mud content, bulk density, and friability), and whether pre-screening is used to separate fine materials before they enter the crushing chamber.
01020304